TOP FIVE APPLIANCE REPAIR PROBLEMS AND THEIR SOLUTIONS

As durable and reliable as they might be, home appliances sometimes break down and require repair.

1. Stalled Washing Machine

Maybe you have gone to transfer a load from the washer into the dryer just to find it soaking in a soapy bath? Even though commercial appliance repair might have broken down at the middle of its cycle, the more probable explanation is really a busted lid or door change. Because your washer is based on a door sensor to ensure its lid is shut, it may stop running if there’s a problem with the switch. In most cases, the switch is damaged by demanding use, such as hammering the lid after falling in a load.

The Fix: Have a service technician replace the door switch.

2. Cold Dryer

If your dryer stops to perform its main purpose, there’s a good chance the problem is really a blown thermal fuse. If this part breaks, the dryer will not produce any heat in any way.

If the heat yields, the machine needs to operate as anticipated.

3. Leaky Freezer

Modern freezers periodically complete defrost cycles to save homeowners the trouble of defrosting the entire device from time to time. Through these cycles, then melted water moves to the drip pan through the defrost drain. But when this defrost drain is clogged with debris and food, water will start to leak out on the lower shelves.

The Fix: Have an appliance repair technician replace or clean the defrost drain.

4.

All top-load washing machines rely upon a part called an agitator that’s used to swish, swirl, and twist clothes through the full cycle. When this part will not move, the appliance can’t perform its function. In most instances, a stalled agitator will continue to make noise while it struggles to move. Because they often assume the problem cannot be fixed, many homeowners simply replace their older washer using a one that is new. This is often a mistake, as the fix costs are generally only a fraction of the purchase price of a new unit.

The Fix: Have the engine coupling replaced.

5. Silent Dishwasher

When a dishwasher turns on but doesn’t run, the problem often involves a part called a float button. Used to control the quantity of water which enters the appliance, the part ensures normal operation. But as it’s accessible from within the device, it’s feasible for a knife, fork, or other item to jam the part, locking it in set position that keeps it from discharging the water needed to operate the machine.

The Fix: Nine days out of ten, a service technician can get rid of the object that is jamming the float button without damaging the part.

An experienced appliance repair technician may address any of the aforementioned difficulties.